Victory V4 The Kraken Guitar Amp Pedal 180w Class D All Tube Preamp Two Notes Torpedo DynIR
Powerful, ultra-compact and lightweight two-channel guitar amplifier for home, studio and live stages!!
Four valves in the front end, 180-watt power section, two channels, reverb and Two notes technology.
Only 1.7kg / 3.75lbs – all the Kraken tone in a small box!
The V4 The Kraken guitar amp partners a V4 Series all-valve preamp with a solid-state, 180-watt Class D power amp. Building on the success of the V4 The Duchess, the V4 Kraken guitar amp continues the ultra-compact size and huge tones by adding even more features. The V4 Kraken guitar amp features Two notes audio engineering Torpedo-embedded DynIR Virtual Cabinet technology making it easy to take your cabinets anywhere!
Gain 1 & 2
Lush sounding digital reverb gives you ambience aplenty. Run it low for a subtle feeling of space, or max it out for washy, splashy hugeness! The reverb is foot-switchable using a TRS cable (sold separately).
Two notes Technology
Series Effects Loop
Balanced Line Out
9V DC Power Output
Speaker choice is critical with V4 The Kraken Guitar Amp
V4 The Kraken can put out a staggering 180 watts at 4-ohms (through the Victory V112 Neo cabinet, for example). However, 4-ohm speaker cabs aren’t exactly common, and nor are single speakers that can take 180 watts, so please proceed with caution with a 4-ohm load.
The nature of Class D, solid-state power sections such as this means that the amp’s output is dependant on the speaker load. If you use a more common 8-ohm cab, output power drops to approximately 90 watts. 16-ohms gives you a still-very-healthy 45 watts.
The principle reason we went with the 180-watt output is because lower-powered solid-state devices can run out of volume and headroom very quickly once you get to 8- and 16-ohm loads.
No such problem here: there’s plenty of power no matter what cab you use.
Preamp valves: 1 x EC900, 3 x CV4014
Power output: 180W @ 4 ohms (approx 90W @ 8 ohms, 45W @ 16 ohms)
Power requirements: Mains IEC
Size: 258(w) x 174(h) x 105mm(d) inc feet & knobs
Weight: 1.7kg (3.75lbs)
Two notes Cab Sim Technology with 6 position preset control
Three band EQ
Series FX loop
Balanced DI out on TRS 6.3mm jack
Additional 9V DC power outlet for pedals etc (maximum total current 500mA, centre-negative)